This page contains links to third parties, if you click through those links we may receive a commission at no extra cost to you.

Engine Fault Code P0359

Ignition Coil I Primary/Secondary Circuit

Care Engine Code Reader
Engine Fault Code P0359 refers to a problem with the ignition coil, specifically for the `I` cylinder, which is often the last coil in a sequence. This code indicates that there is an issue with the primary or secondary circuit of that ignition coil. It can mean that the coil is not functioning properly, or there may be a wiring issue, such as a short or an open circuit.

Different manufacturers may have slightly different interpretations or additional codes related to this issue, but generally, P0359 is quite consistent across various brands. Here are some potential alternative meanings or related codes for different manufacturers:

1. P0359 (General): Ignition Coil I Primary/Secondary Circuit Problem.
2. P0350-P0358: Codes for other ignition coils (A to H) indicating similar issues with those specific coils.
3. P0359 (Audi, Volkswagen): Might be related to issues with the specific ignition coil for the engine configuration.
4. P0359 (Mercedes-Benz): Can indicate a failure in the ignition system or a wiring issue specific to that cylinder.
5. P0359 (Jaguar, Land Rover): Similar interpretation, focusing on ignition issues for the specified cylinder.

When diagnosing this code, its essential to check the ignition coil, wiring, and connectors for any damage or faults. Its also a good idea to look for any related codes that might give more context to the problem.
The Engine Fault Code P0359 relates to the ignition coil, specifically indicating a problem in the primary or secondary circuit of the ignition coil labeled `I.` This code can be triggered by several issues, and while the general causes are similar across different manufacturers, there can be some variations. Here are the common causes:

1. Faulty Ignition Coil: The ignition coil itself may be defective. This is one of the most common reasons for the P0359 code.

2. Wiring Issues: Damaged or corroded wiring connected to the ignition coil can cause a poor connection. This includes broken wires, frayed insulation, or loose connections.

3. Connector Problems: The electrical connector for the ignition coil may be loose or damaged, leading to an intermittent connection.

4. ECU Issues: The Engine Control Unit (ECU) may have a fault. If the ECU is not sending the correct signals to the ignition coil, it can trigger this code.

5. Secondary Circuit Problems: Issues with the secondary circuit, such as a short to ground or an open circuit, can also cause this code. This includes problems with spark plugs or ignition wires.

6. Other Ignition System Components: Problems with other components in the ignition system, such as the crankshaft position sensor or camshaft position sensor, may also lead to this code being triggered.

Manufacturer-Specific Variations:

Porsche: On some Porsche models, a faulty ignition coil may also affect performance features like the Sport Chrono system, leading to a more noticeable decline in power.

Mini: In Mini vehicles, a common issue can be the high-pressure fuel pump, which may indirectly affect the ignition system and trigger the code.

Mercedes: Mercedes models may have more complex wiring harnesses, and issues in these harnesses can lead to P0359. Additionally, the use of multiple ignition coils may mean that one faulty coil can affect others.

Audi: Audi vehicles often have integrated ignition coils, and a failure in one coil can affect multiple cylinders, leading to multiple codes being triggered.

Jaguar: In some Jaguar models, the P0359 code may be thrown if there are issues with the battery voltage or ground connections.

Land Rover: For Land Rover vehicles, the code may also indicate issues with the vehicles air intake system, which can affect the ignition system`s performance.



If you encounter the P0359 code, it`s essential to perform a thorough diagnostic check. Start by inspecting the ignition coil, wiring, and connectors. If those are in good condition, consider checking the ECU and other related components. Always refer to the vehicle`s service manual for specific troubleshooting steps and specifications.
The P0359 code indicates a problem with the ignition coil`s primary or secondary circuit, specifically for ignition coil `I.` This can affect engine performance, leading to misfires or rough running. Heres how to troubleshoot and fix it, keeping in mind that there may be variations depending on the make and model of your vehicle.

General Steps to Fix P0359:

1. Check the Code: Use an OBD-II scanner to confirm the P0359 code and check for any other related codes. This helps in diagnosing the issue more accurately.

2. Inspect the Ignition Coil:
– Locate ignition coil `I` (refer to your vehicle`s manual for the exact location).
– Check for physical damage, corrosion, or loose connections.

3. Test the Ignition Coil:
– Use a multimeter to test the resistance of the coil.
– For most vehicles, the primary resistance should be between 0.5 to 2 ohms, and the secondary resistance should be between 6,000 to 15,000 ohms. Check your vehicle`s specifications for exact values.

4. Check Wiring and Connectors:
– Inspect the wiring harness leading to the ignition coil for any frays or breaks.
– Ensure that all connectors are clean and securely attached.

5. Test the Power and Ground:
– With the ignition on, check for voltage at the ignition coil connector.
– Use the multimeter to ensure there is a proper ground signal.

6. Replace the Ignition Coil:
– If the coil is faulty, replace it with a new one. Make sure to use OEM parts or high-quality aftermarket parts.

7. Clear the Codes:
– After replacing the coil, use the OBD-II scanner to clear the fault codes.
– Start the engine and see if the code returns.

Manufacturer-Specific Considerations:

Porsche: Check for any software updates or recalls related to the ignition system. Some models may have specific quirks that require dealer input.

Mini: Ensure the battery is fully charged, as low voltage can affect the ignition system.

Mercedes: Some models may have a specific fuse for the ignition coils. Check the fuse box and replace any blown fuses.

Audi: Look for TSBs (Technical Service Bulletins) related to ignition coil issues, as there may be known fixes.

Jaguar: Pay attention to the engine management system, as some models may require a reset after replacing coils.

Land Rover: Check for any water ingress in the ignition coil area, particularly in older models.

Final Thoughts:
If youve gone through these steps and the problem persists, it might be time to consult a professional mechanic. Ignition issues can sometimes be linked to other components, like the Engine Control Module (ECM), so a thorough diagnosis is essential.
Code P0359 indicates a problem with the ignition coil`s primary or secondary circuit, specifically for cylinder number 9. This code can affect various vehicles, including those from Porsche, Mini, Mercedes, Audi, Jaguar, and Land Rover.

Driving with this code can be risky. Here are some reasons why:

1. Engine Performance: The car may misfire, leading to rough idling, poor acceleration, and decreased fuel efficiency.
2. Emissions: A misfiring engine can lead to higher emissions, which may cause you to fail an emissions test.
3. Potential Damage: Continuing to drive could cause further damage to the ignition system or other engine components.

Manufacturer Differences

Porsche: Ignoring this code can lead to engine damage. It`s best to address it promptly.

Mini: Similar issues with misfires may occur. Driving is not recommended until the problem is fixed.

Mercedes: Mercedes vehicles often have sophisticated engine management systems. Ignoring the issue can lead to more significant problems.

Audi: Audi engines may go into limp mode to protect themselves, limiting performance until the issue is resolved.

Jaguar: Jaguar vehicles can experience similar performance issues, and it`s wise to have the code checked out.

Land Rover: Driving could lead to more severe engine issues. It`s best to get it diagnosed as soon as possible.

Conclusion

Our view, it is not safe to drive with a P0359 code. It`s best to have the vehicle inspected by a qualified mechanic to determine the exact cause and fix the issue.

OBD Codes Explained

Engine Codes

P is for PowerTrain - Engine and Transmission.

P0 Indicates Generic Powertrain Codes

P0 Codes indicate problems with the powertrain and are common for all vehicles using the OBD-II Standard.

P1 Enhanced Manufacturer Specific Codes

P1 Codes are specific to manufacturers.

Sub-System

The 3rd Digit indicates the Sub-System

1 – Emission Management

2 – Injector Circuit

3 – Ignition

4 – Emission Control

5 – Vehicle Speed and Idle

6 – Computer and Output

7 – Transmission

8 – Transmission

9 – Reserved

0 – Reserved

0
    0
    Your Cart
    Your cart is emptyReturn to Shop

    Need parts advice?

    Tell us what you need and we will be in touch shortly.

    Contact Information
    Vehicle Information