This page contains links to third parties, if you click through those links we may receive a commission at no extra cost to you.

Engine Fault Code P0892

TCM Power Relay Sense Circuit Intermittent

Care Engine Code Reader
The Engine Fault Code P0892 refers to an issue with the Transmission Control Module (TCM) power relay sense circuit. This code indicates that the TCM is not receiving a stable power signal, which can affect the transmission`s performance. Heres a breakdown of what it means and possible implications:

General Meaning:
– P0892: TCM Power Relay Sense Circuit Intermittent
– This means that the TCM is experiencing a power supply issue. The relay may be faulty, or there could be a wiring problem.

Possible Symptoms:
– Transmission may not shift properly.
– Vehicle may go into `limp mode.`
– Warning lights may appear on the dashboard.

Common Causes:
1. Faulty TCM Power Relay: The relay may be failing or have poor connections.
2. Wiring Issues: Damaged or corroded wires can interrupt the power supply.
3. Faulty TCM: The TCM itself might be malfunctioning.
4. Battery or Charging Issues: A weak battery can also affect the relay`s operation.

Manufacturer Variations:
While P0892 generally has the same meaning across many brands, some manufacturers might have specific interpretations or additional troubleshooting steps. Here are a few examples:

Mercedes-Benz: The code may indicate a need to check the transmission control module`s power supply and ground connections.
Audi: Similar to Mercedes, but may also involve checking for software updates for the TCM.
Porsche: The focus might be on the integration between the engine and transmission control systems.
Mini: The code could also suggest a need to inspect the vehicle`s battery and electrical connections due to Mini`s unique electrical systems.
Jaguar: Might involve a more thorough diagnostic of the TCM and associated wiring harnesses.
Land Rover: Often has complex electrical systems, so it may require specific tests for the power relay and TCM.

What to Do:
1. Visual Inspection: Check the power relay and wiring for damage or corrosion.
2. Test the Relay: If you have the tools, test the relay for proper operation.
3. Scan for Additional Codes: There might be other codes that can provide more context.
4. Consult a Professional: If you`re unsure, it`s best to take the vehicle to a qualified mechanic who specializes in European cars.

Remember, it`s important to address this issue promptly to avoid further transmission problems.
The Engine Fault Code P0892 indicates an issue with the Transmission Control Module (TCM) power relay sense circuit. This code can appear in various vehicles, including European brands like Porsche, Mini, Mercedes, Audi, Jaguar, and Land Rover. Here are some common causes and manufacturer-specific differences:

Common Causes:
1. Faulty TCM Relay: The relay that powers the TCM may be malfunctioning, leading to intermittent power loss.
2. Wiring Issues: Damaged or corroded wiring in the power relay circuit can cause poor connections and intermittent signals.
3. Bad TCM: A failing Transmission Control Module may not send the correct signals, resulting in this code.
4. Poor Ground Connection: A bad ground connection can disrupt the power supply to the TCM.
5. Battery Voltage Problems: Low or fluctuating battery voltage can affect the operation of the TCM and relay.

Manufacturer-Specific Differences:
Porsche: Wiring issues are common due to tight spaces in the engine compartment. Check for chafed wires near the TCM.
Mini: Mini vehicles often have issues with the TCM connectors. Ensure they are clean and properly seated.
Mercedes: Mercedes may have specific software updates for the TCM that can resolve intermittent issues. Always check for recalls or updates.
Audi: Audi models may have more complex wiring harnesses, so inspecting the entire circuit for shorts or breaks is crucial.
Jaguar: In Jaguars, the TCM may be integrated with other modules, so diagnosing the entire system may be necessary.
Land Rover: Land Rover vehicles often have issues with water ingress in connectors. Inspect for moisture or corrosion.


If you encounter code P0892, start with a thorough inspection of the relay, wiring, and connections. Depending on the specific vehicle, you may need to focus on particular components or software updates. Always consult the vehicles manual or a professional for detailed diagnostics.
The Engine Fault Code P0892 indicates an issue with the Transmission Control Module (TCM) power relay sense circuit. This can happen in various European vehicles like Porsche, Mini, Mercedes, Audi, Jaguar, and Land Rover. Heres how to approach fixing it:

Steps to Fix P0892 Code

1. Check the Battery and Connections:
– Make sure the battery is fully charged and the connections are clean and tight. A weak battery can cause intermittent issues.

2. Inspect the TCM Relay:
– Locate the TCM relay in the fuse box. Check for any signs of damage or corrosion. If it looks bad, replace it.

3. Test the Relay Circuit:
– Use a multimeter to check the voltage at the relay. You should see around 12 volts when the ignition is on. If not, there might be a wiring issue.

4. Examine Wiring and Connectors:
– Look for damaged or frayed wires in the TCM circuit. Pay special attention to the connectors for corrosion or loose connections.

5. Scan for Other Codes:
– Use an OBD-II scanner to check for any other trouble codes that may give clues to the problem. Fixing other codes might resolve the P0892 as well.

6. Check the TCM:
– If everything else looks good, the TCM itself might be faulty. This usually requires professional diagnosis and possibly replacement.

7. Clear the Code:
– After making repairs, clear the code using an OBD-II scanner and take the car for a test drive to see if the code returns.

Manufacturer-Specific Notes

Porsche: Check for software updates for the TCM. Sometimes, a simple reprogramming can fix the issue.

Mini: Mini vehicles may have specific relay locations, so refer to the owners manual for exact locations and specifications.

Mercedes: Mercedes can have complex electrical systems. If the code persists, consider using a diagnostic tool that can access more advanced systems.

Audi: Audi vehicles may require VAG-COM software for detailed diagnostics. This can help pinpoint the issue more accurately.

Jaguar: Jaguars TCM might be integrated with other modules, so ensure all related systems are functioning properly.

Land Rover: Land Rover vehicles sometimes have issues with the air suspension that can affect the TCM. Check for any air suspension faults.

Final Thoughts

If youre not comfortable with electrical diagnostics, it might be best to consult with a professional mechanic. They have the tools and experience to diagnose and fix the issue accurately.
Driving with a P0892 code, which indicates an issue with the Transmission Control Module (TCM) power relay sense circuit, can be risky. This code typically means that the TCM isn`t receiving consistent power, which can lead to transmission problems. Heres how it may vary by manufacturer:

General Considerations:
1. Transmission Issues: You might experience shifting problems, such as rough shifts or slipping.
2. Check Engine Light: The light may stay on, indicating a need for repairs.
3. Safety: If the transmission fails, it could lead to loss of control while driving.

Manufacturer-Specific Notes:

#Porsche:
– Impact: Porsche vehicles often have advanced transmission systems. Driving with this code can lead to serious transmission damage.
– Its best to get this checked immediately.

#Mini:
– Impact: Mini vehicles may show erratic behavior in automatic transmission performance.
– It`s advisable to avoid driving until the issue is resolved.

#Mercedes:
– Impact: Mercedes cars are known for their sophisticated electronics. A faulty TCM can lead to emergency mode activation.
– Seek professional help as soon as possible.

#Audi:
– Impact: Audi vehicles may go into limp mode, limiting your speed and performance.
– Avoid driving until the issue is diagnosed and repaired.

#Jaguar:
– Impact: Jaguars advanced transmission systems can exhibit severe issues if the TCM is not functioning properly.
– Get it checked out right away to avoid further damage.

#Land Rover:
– Impact: Land Rover vehicles can face significant transmission issues, affecting off-road capabilities.
– Its best to refrain from driving until the problem is fixed.


Our view, its not safe to drive with a P0892 code. The best course of action is to have a qualified mechanic inspect the vehicle to prevent further damage and ensure safety.

OBD Codes Explained

Engine Codes

P is for PowerTrain - Engine and Transmission.

P0 Indicates Generic Powertrain Codes

P0 Codes indicate problems with the powertrain and are common for all vehicles using the OBD-II Standard.

P1 Enhanced Manufacturer Specific Codes

P1 Codes are specific to manufacturers.

Sub-System

The 3rd Digit indicates the Sub-System

1 – Emission Management

2 – Injector Circuit

3 – Ignition

4 – Emission Control

5 – Vehicle Speed and Idle

6 – Computer and Output

7 – Transmission

8 – Transmission

9 – Reserved

0 – Reserved

0
    0
    Your Cart
    Your cart is emptyReturn to Shop